Theoretical investigation of the carbonyl-ene reaction between encapsulated formaldehyde and propylene over M-Cu-BTC paddlewheels (M= Be, Mg, and Ca): A DFT study.

Formaldehyde is a VOC gas that plays a key role in air pollution. To limit emissions into the environment, the utilization of this waste as a raw material is a promising way. In this work, the M06-L functional calculation was used to investigate the structure, electronic properties, and catalytic activity of group IIA metals (Be, Mg, and Ca) partial substitution on Cu-BTC paddlewheels for formaldehyde encapsulation and carbonyl-ene reaction with propylene. Formaldehyde is absorbed by the metal center of the paddlewheel via its oxygen atom. The adsorption of formaldehyde on the substituted metal sites increased as compared to the parent Cu-BTC which can facilitate formaldehyde to react with propylene. The adsorption free energies are predicted to be -15.1 (Be-Cu-BTC), -14.7 (Mg-Cu-BTC), and -14.5 (Ca-Cu-BTC) kcal mol-1, respectively. The substituted metal has a slight effect on the Lewis acidity of the Cu ion in the paddlewheel. The adsorption free energy of formaldehyde, similar to that found in the pristine Cu-BTC, is observed. For the carbonyl-ene reaction, the reaction is proposed via a single step involving the C-C bond formation between two reactants and one hydrogen of propylene methyl group moves to formaldehyde oxygen, simultaneously. It was found that the substituted metals do not affect the catalytic performance of the Cu center for this reaction. The activation energies for the reaction at the Cu center are in the range of 22.0-23.4 kcal mol-1, which are slightly different from Cu-BTC (21.5 kcal mol-1). Interestingly, the catalytic activity of this reaction on the substituted metal is greater than that on the Cu center. The catalytic activities are in the order Be-Cu-BTC (13.3 kcal mol-1) > Mg-Cu-BTC (15.9 kcal mol-1) > Ca-Cu-BTC (17.8 kcal mol-1). Among them, the Be site of the bimetallic Be-Cu-BTC paddlewheel is predicted as a promising candidate catalyst.

Heat 'n Beat: A Universal High-Throughput End-to-End Proteomics Sample Processing Platform in under an Hour.

Proteomic analysis by mass spectrometry of small (≤2 mg) solid tissue samples from diverse formats requires high throughput and comprehensive proteome coverage. We developed a nearly universal, rapid, and robust protocol for sample preparation, suitable for high-throughput projects that encompass most cell or tissue types. This end-to-end workflow extends from original sample to loading the mass spectrometer and is centered on a one-tube homogenization and digestion method called Heat 'n Beat (HnB). It is applicable to most tissues, regardless of how they were fixed or embedded. Sample preparation was divided into separate challenges. The initial sample washing and final peptide cleanup steps were adapted to three tissue sources: fresh frozen (FF), optimal cutting temperature (OCT) compound embedded (FF-OCT), and formalin-fixed paraffin embedded (FFPE). Third, for core processing, tissue disruption and lysis were decreased to a 7 min heat and homogenization treatment, and reduction, alkylation, and proteolysis were optimized into a single step. The refinements produced near doubled peptide yield when compared to our earlier method ABLE delivered a consistently high digestion efficiency of 85-90%, reported by ProteinPilot, and required only 38 min for core processing in a single tube, with the total processing time being 53-63 min. The robustness of HnB was demonstrated on six organ types, a cell line, and a cancer biopsy. Its suitability for high-throughput applications was demonstrated on a set of 1171 FF-OCT human cancer biopsies, which were processed for end-to-end completion in 92 h, producing highly consistent peptide yield and quality for over 3513 MS runs.

Co-adsorption enhancement of formaldehyde/carbon dioxide over modified hexagonal boron nitride for whole-surface capture purification.

Simultaneous capture of formaldehyde (HCHO) and carbon dioxide (CO2) in indoor air is promising of achieving indoor-air purification. Of all potential adsorbents, hexagonal boron nitride (h-BN) is one of the most suitable species owing to facile formation of attraction points. Therefore, in this study, performances of HCHO and CO2 being adsorbed over pure/modified h-BN are systematically investigated via density functional theory (DFT) calculations. Minutely speaking, direct interaction between HCHO and CO2, single-point adsorption enhancement of HCHO over modified h-BN, co-adsorption reinforcement of HCHO/CO2 as well as relevant thermodynamic characteristics are major research contents. According to calculation results, there is relatively strong attraction between HCHO and CO2 owing to hydrogen bonds, which is in favor of co-adsorption of HCHO/CO2. As to single-adsorption of HCHO, C-doped h-BN shows better adsorption features than P-doped h-BN and C/P-doped h-BN is slightly weakened in adsorption ability due to surficial deformation caused by P atoms. For co-adsorption of HCHO/CO2, CO2 is the protagonist via formation of quasi-carbonate with the help of delocalized π-orbital electrons. Regarding effects of temperatures on adsorption strengths, they depend on interelectronic interactions among dopant atoms and finally derives from dispersion of π bonds across adsorbents. Overall, this study provides detailed mechanisms for co-capture of HCHO/CO2 to accomplish indoor-air purification.

Bonding performance and surface characterization of cold-bonded acetylated beech (Fagus sylvatica L.) laminated veneer lumber.

Acetylation of wood with acetic anhydride reduces the wood-moisture interaction, improves the dimensional stability and resistance against biodegradation. However, the adhesive bonding is affected by the modification, which is crucial to manufacture engineered wood products, such as laminated veneer lumber (LVL). In this study we report the bonding of 8-layered acetylated beech (Fagus sylvatica L.) LVL boards to 2-layered LVL beams. The beams were glued together at room temperature adding three common load-bearing construction adhesives: melamine-urea-formaldehyde (MUF), phenol-resorcinol-formaldehyde (PRF), and one-component polyurethane (PUR). The bonding performance was tested by assessing its dry and wet tensile shear strength (TSS) and wood failure percentage (WF). Also evaluated were the material's density and moisture content (MC). The surface was characterized prior to bonding by its pH, roughness, and contact angle (CA). The adhesive penetration was observed by fluorescence microscopy. Aside from MUF, applying PRF and PUR adhesives achieved good bonding performance on acetylated LVL and references. Acetylated LVL displayed a more hydrophobic behaviour, a higher pH, a somewhat smoother surface, and an increased density.

Synthesis and characterization of a bio-aldehyde-based lignin adhesive with desirable water resistance.

Wood-based panels find widespread application in the furniture and construction industries. However, over 90 % of adhesives used are synthesized with formaldehyde, leading to formaldehyde emission and associated health risks. In this study, an entirely bio-based adhesive (OSL) was innovatively proposed through the condensation of multi-aldehyde derived from the oxidization of sucrose (OS) with sodium lignosulfonate (L). This approach positioned oxidized sucrose (OS) as a viable substitute for formaldehyde, ensuring safety, simplicity, and enhance water resistance upon reaction with L. The optimization of the OSL adhesive preparation process involved determining the oxidant level for high sucrose conversion to aldehyde (13 % based on sucrose), the mass ratio of OS to L (0.8), and hot-pressing temperature (200 °C). Notably, the shear strength of 3-plywood bonded with the developed adhesive (1.04 MPa) increased to 1.42 MPa after being immersed in hot water at 63 ±â€¯3 °C for 3 h. Additionally, the plywood specimens exhibited excellent performance after soaking in boiling water for 3 h, resulting in a shear strength of 1.03 MPa. Chemical analysis using Fourier-transform infrared spectroscopy (FTIR), 1H nuclear magnetic resonance (NMR), and X-ray photoelectron spectroscopy (XPS) confirmed an addition reaction between L and OS, forming a dense network structure, effectively enhanceing the water resistance of OSL adhesives. Furthermore, compared with lignin-formaldehyde resin adhesive (LF), the OSL adhesive exhibited superior wet shear strength. This study offered an innovative approach for developing lignin-based adhesives utilizing a biomass aldehyde (OS), as a promising substitute for formaldehyde in the wood industry. The findings indicated that this approach may advance lignin-based adhesives, ensuring resistance to strength deterioration under highly humid environmental conditions.

Surficial engineering of active hydroxyls for ambient formaldehyde oxidation via enhanced Lewis acidity over Zr-doped cryptomelane materials.

Lewis acids of solid catalysts have been featured for a pivotal role in promoting various reactions. Regarding the oxidation protocol to remove formaldehyde, the inherent drawback of the best-studied MnO2 materials in acidic sites has eventually caused deficiency of active hydroxyls to sustain low-temperature activity. Herein, the cryptomelane-type MnO2 was targeted and it was tuned via incorporation of Zr metal, exhibiting great advances in not only the complete HCHO-to-CO2 degradation but also cycling performance. Zr species were existent in doping state in the MnO2 lattice, rendering lower crystallinity and breaking the regular growth of MnO2 crystallites, which thereby tripled surface area and created larger volume of smaller mesopores. Meantime, the local electronic properties of Mn atoms were also changed by Zr doping, i.e., more low-valence Mn species were formed due to the electron transfer from Zr to Mn. The results of infrared studies demonstrate the higher possession of Lewis acid sites on ZrMn, and this high degree of electrophilic agents favored the production of hydroxyl species. Furthermore, the reactivity of surface hydroxyls, as investigated by CO temperature programmed reduction and temperature programmed desorption of adsorbed O2, was obviously improved as well after Zr modification. It is speculated jointly with the characterizations of the post-reaction catalysts that the accelerated production of active hydroxyls helped rapidly convert formaldehyde into key intermediate-formate, which was then degraded into CO2, avoiding the side reaction path with undesired intermediate-hydrocarbonate-over the pristine MnO2, where active sites were blocked and formaldehyde oxidation was inhibited. Additionally, Zr decoration could stabilize Lewis acidity to be more resistant to heat degeneration, and this merit brought about advantageous thermal recyclability for cycled application.

Synthesis and characterization of microencapsulated paraffin with melamine-urea-formaldehyde shell modified with lignin.

The study aims to fabricate MUF/paraffin microcapsules with lignin nanoparticles (LNPs)/ melamine-urea-formaldehyde (MUF) resin as hybrid shell material with different LNPs addition were synthesized in oil-in-water emulsion stabilized synergistically by styrene/maleic anhydride (SMA) and LNPs. The morphological characterization of LNPs was observed by transmission electron microscopy (TEM). The particle size of LNPs, the mean particle size and ξ potentials of SMA/LNPs mixture at pH =4.5 were investigated by zeta potential measurement. Field emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analyzer (TGA), and differential scanning calorimetry (DSC) were characterized the morphologies, crystallography, chemical component, thermal stability and phase change properties of MUF/paraffin microcapsules with different LNPs addition. The results showed that MUF/paraffin microcapsules were spherical. The LNPs did not influence the chemical structure or crystal type of MUF/paraffin microcapsules. When the LNPs addition was 0.15 g, the melting enthalpy and crystallization enthalpy is respectively 130.03 and 121.92 J/g and the encapsulation efficiency of MicroC-15 is 61.04 %.

Histochemical and morphological evaluation of a glyoxal acid-free fixative.

The application of most chemical fixatives, such as formalin, in the anatomic pathology laboratory requires safety training and hazardous chemical monitoring due to the toxicity and health risks associated with their use. Consequently, the use of formalin has been banned in most applications in Europe; the primary exception is its use in the histology laboratory in lieu of a suitable and safer alternative. Glyoxal based solutions, several of which are available commercially, are the most promising alternative fixatives, because they are based on a mechanism of fixation similar to that of formalin. Unlike formalin, however, glyoxal based solutions do not dissociate from water and therefore do not require ventilation measures such as a fume hood. A primary barrier to the adoption of commercially available glyoxal based solutions is their low pH, which can produce undesirable morphological and antigenic tissue alterations; however, a recently available neutral pH glyoxal product (glyoxal acid free) (GAF) has been developed to mitigate the challenges of low pH. We compared the morphology and histochemistry among tissues fixed in 10% neutral buffered formalin, a commercially available acidic glyoxal product (Prefer), and GAF. Tissues fixed in formalin and Prefer exhibited similar morphology and staining properties; tissues fixed with 2% GAF exhibited deleterious effects.

Hot alkaline lysis gDNA extraction from formalin-fixed archival tissues.

Formalin fixation of natural history specimens and histopathological material has historically been viewed as an impediment to successful genomic analysis. However, the development of extraction methods specifically tailored to contend with heavily crosslinked archival tissues, re-contextualises millions of previously overlooked specimens as viable molecular assets. Here, we present an easy-to-follow protocol for screening archival wet specimens for molecular viability and subsequent genomic DNA extraction suitable for sequencing. The protocol begins with non-destructive assessment of specimen degradation and preservation media conditions to allow both museum curators and researchers to select specimens most likely to yield an acceptable proportion (20-60%) of mappable endogenous DNA during short-read DNA sequencing. The extraction protocol uses hot alkaline lysis in buffer (0.1M NaOH, 1% SDS, pH 13) to simultaneously lyse and de-crosslink the tissue. To maximise DNA recovery, phenol:chloroform extraction is coupled with a small-fragment optimised SPRI bead clean up. Applied to well-preserved archival tissues, the protocol can yield 1-2 µg DNA per 50 mg of tissue with mean fragment sizes typically ranging from 50-150 bp, which is suitable to recover genomic DNA sufficient to reconstruct complete mitochondrial genomes and achieve up to 25X nuclear genome coverage. We provide guidance for read mapping to a reference genome and discuss the limitations of relying on small fragments for SNP genotyping and de novo genome assembly. This protocol opens the door to broader-scale genetic and phylogenetic analysis of historical specimens, contributing to a deeper understanding of evolutionary trends and adaptation in response to changing environments.

Study on the mechanism of acid treatment La0.8Sr0.2Mn0.8Cu0.2O3 to improve the catalytic activity of formaldehyde at low temperature.

To address the issue of surface enrichment of A-site ions in perovskite and the resulting suppression of catalytic activity, the La0.8Sr0.2Mn0.8Cu0.2O3 was modified by treatment with dilute nitric acid (2 mol/L) and dilute acetic acid (2 mol/L). The results show that the effect of dilute nitric acid treatment on the morphology and catalytic activity of the catalyst is more significant. The specific surface area of the catalyst after dilute nitric acid treatment (268.78 m2/g) is seven times higher than before treatment (37.55 m2/g). The low-temperature catalytic oxidation activity of HCHO of the catalyst after dilute nitric acid treatment is significantly improved, achieving a 50% HCHO oxidation efficiency at 80 °C, while the original sample requires 127 °C to achieve a 50% HCHO conversion. The excellent catalytic activity of the catalyst after dilute nitric acid treatment is related to its large specific surface area, high surface-active site density, and abundant Mn4+ ions. Stability and water resistance experiments show that the catalyst after dilute nitric acid treatment has excellent reaction stability and good water resistance ability. The mechanism of the formaldehyde oxidation reaction is that formaldehyde is first oxidized to a dioxymethylene (DOM) intermediate and DOM dehydrogenation reaction is responsible for the formation of formate species (HCOO-).

Formalin-Fixed Paraffin-Embedded Proteomics of Malignant Mesothelioma and New Candidate Biomarkers Thioredoxin and Superoxide Dismutase 2 for Immunohistochemistry.

The pathogenesis of malignant mesothelioma (MM) has been extensively investigated, focusing on stress derived from reactive oxygen species. We aimed to identify diagnostic biomarkers of MM by analyzing proteins in formalin-fixed paraffin-embedded specimens using liquid chromatography-mass spectrometry. We extracted proteins from formalin-fixed paraffin-embedded sections of MM tissues (n = 7) and compared their profiles with those of benign mesothelial tissues (n = 4) and alveolar tissue (n = 1). Proteomic data were statistically assessed and profiled using principal component analysis. We were successful in the classification of MM and healthy tissue. The levels of superoxide dismutase 2 (SOD2), an enzyme that converts superoxide anion into oxygen and hydrogen peroxide, and thioredoxin (TXN), which plays a crucial role in reducing disulfide bonds in proteins, primarily contributed to the classification. Other redox-related proteins, such as pyruvate dehydrogenase subunit X, and ceruloplasmin also contributed to the classification. Protein-protein interaction analysis demonstrated that these proteins play essential roles in MM pathogenesis. Immunohistochemistry revealed that TXN levels were significantly lower, whereas SOD2 levels were significantly higher in MM and lung cancer tissues than in controls. Proteomic profiling suggested that MM tissues experienced increased exposure to hydrogen peroxide and other reactive oxygen species. Combining immunohistochemistry for TXN and SOD2 allows for differentiation among MM, lung cancer, and control tissues; hence, TXN and SOD2 may be promising MM biomarkers and therapeutic targets.

Electrospun microcrystalline cellulose/chitosan porous composite nanofibrous membranes modified by non-thermal plasma for gaseous formaldehyde adsorption.

To develop a green and facile adsorbent for removing indoor polluted formaldehyde (HCHO) gas, the biomass porous nanofibrous membranes (BPNMs) derived from microcrystalline cellulose/chitosan were fabricated by electrospinning. The enhanced chemical adsorption sites with diverse oxygen (O) and nitrogen (N)-containing functional groups were introduced on the surface of BPNMs by non-thermal plasma modification under carbon dioxide (CO2) and nitrogen (N2) atmospheres. The average nanofiber diameters of nanofibrous membranes and their nanomechanical elastic modulus and hardness values decreased from 341 nm to 175-317 nm and from 2.00 GPa and 0.25 GPa to 1.70 GPa and 0.21 GPa, respectively, after plasma activation. The plasma-activated nanofibers showed superior hydrophilicity (WCA = 0°) and higher crystallinity than that of the control. The optimal HCHO adsorption capacity (134.16 mg g-1) of BPNMs was achieved under a N2 atmosphere at a plasma power of 30 W and for 3 min, which was 62.42 % higher compared with the control. Pyrrolic N, pyridinic N, CO and O-C=O were the most significant O and N-containing functional groups for the improved chemical adsorption of the BPNMs. The adsorption mechanism involved a synergistic combination of physical and chemical adsorption. This study provides a novel strategy that combines clean plasma activation with electrospinning to efficiently remove gaseous HCHO.

Constructing α-MnO2/Mn2O3 heterojunction for formaldehyde oxidation.

Constructing heterojunctions with oxygen defect-rich structures and abundant phase interfaces poses an appealing yet challenging task in the development of non-precious metal oxide catalysts for formaldehyde (HCHO) oxidation. Herein, we present a simple and efficient method for fabricating highly active manganese oxide heterojunction catalysts for HCHO oxidation. This method involves the hydrothermal synthesis of a nanostructured α-MnO2/γ-MnOOH composite, followed by mechanical milling-induce phase transformation of γ-MnOOH to Mn2O3. Importantly, mechanical milling not only creates the heterojunction but also imparts oxygen defect-rich structures and an abundant phase interface to the catalyst. The resulting α-MnO2/Mn2O3 heterojunction exhibits outstanding performance in HCHO oxidation, comparable to the best non-precious metal oxide catalysts reported thus far. It achieves a 100% conversion of 100 ppm HCHO under a gas hourly space velocity of 120 L gcat-1 h-1 at 80 °C, corresponding to a mass-specific reaction rate of 8.92 µmol g-1 min-1 and an area-specific reaction rate of 0.18 µmol m-2 min-1. Based on the control experiments using in situ diffuse reflectance infrared Fourier transform spectroscopy combined with online gas chromatography, we gained insights into the mechanism of HCHO oxidation over the α-MnO2/Mn2O3 catalyst and the functional roles played by its component phases.

Does tissue fixation change the mechanical properties of dry ovine bone extracellular matrix?

Tissue fixation is a prevalent method for bone conservation. Bone biopsies are typically fixed in formalin, dehydrated in ethanol, and infiltrated with polymethyl methacrylate (PMMA) Since some experiments can only be performed on fixed bone samples, it is essential to understand how fixation affects the measured material properties. The aim of this study was to quantify the influence of tissue fixation on the mechanical properties of cortical ovine bone at the extracellular matrix (ECM) level with state-of-the-art micromechanical techniques. A small section from the middle of the diaphysis of two ovine tibias (3.5 and 5.5 years old) was cut in the middle and polished on each side, resulting in a pair of mirrored surfaces. For each pair, one specimen underwent a fixation protocol involving immersion in formalin, dehydration with ethanol, and infiltration with PMMA. The other specimen (mirrored) was air-dried. Six osteons were selected in both pairs, which could be identified in both specimens. The influence of fixation on the mechanical properties was first analyzed using micropillar compression tests and nanoindentation in dry condition. Additionally, changes in the degree of mineralization were evaluated with Raman spectroscopy in both fixed and native bone ECM. Finally, micro tensile experiments were conducted in the 3.5-year fixed ovine bone ECM and compared to reported properties of unfixed dry ovine bone ECM. Interestingly, we found that tissue fixation does not alter the mechanical properties of ovine cortical bone ECM compared to experiments in dry state. However, animal age increases the degree of mineralization (p = 0.0159) and compressive yield stress (p = 0.041). Tissue fixation appears therefore as a valid conservation technique for investigating the mechanical properties of dehydrated bone ECM.

Routine Workflow of Spatial Proteomics on Micro-formalin-Fixed Paraffin-Embedded Tissues.

In the era of single-cell biology, spatial proteomics has emerged as an important frontier. However, it still faces several challenges in technology. Formalin-fixed paraffin-embedded (FFPE) tissues are an important material in spatial proteomics, in which fixed tissues are excised using laser capture microdissection (LCM), followed by protein identification with mass spectrometry. For a satisfied spatial proteomics upon FFPE tissues, the excision area is expected to be as small as possible, and the identified proteins are countered upon as much as possible. For a general laboratory for spatial proteomics, a routine workflow is required, not relying on any special device, and is easily operating. In view of these challenges in technology, we initiated a technology evaluation throughout the entire procedure of proteomic analysis with micro-FFPE tissues. In contrast to the protocols reported previously, several innovations in technology were proposed and conducted, such as removal of destaining, decross-linking with "hang-down", solution simplification for peptide generation and balancing to excision area, and capture rate of micro-FFPE tissues. After optimization of all the necessary steps, a routine workflow was established, in which the minimized area for protein identification was 0.002 mm2, while the excision area for a consistent proteomic analysis was 0.05 mm2. Using the developed workflow and collecting the micro-FFPE tissues continuously, for the first time, a spatial proteomic atlas of mouse brain was preliminarily constructed, which exhibited the typical characteristics of spatial-dependent protein abundance and functional enrichment.

A Guide to MALDI Imaging Mass Spectrometry for Tissues.

Imaging mass spectrometry is a well-established technology that can easily and succinctly communicate the spatial localization of molecules within samples. This review communicates the recent advances in the field, with a specific focus on matrix-assisted laser desorption/ionization (MALDI) imaging mass spectrometry (IMS) applied on tissues. The general sample preparation strategies for different analyte classes are explored, including special considerations for sample types (fresh frozen or formalin-fixed,) strategies for various analytes (lipids, metabolites, proteins, peptides, and glycans) and how multimodal imaging strategies can leverage the strengths of each approach is mentioned. This work explores appropriate experimental design approaches and standardization of processes needed for successful studies, as well as the various data analysis platforms available to analyze data and their strengths. The review concludes with applications of imaging mass spectrometry in various fields, with a focus on medical research, and some examples from plant biology and microbe metabolism are mentioned, to illustrate the breadth and depth of MALDI IMS.

Enhanced formaldehyde oxidation over MnO2 and doped manganese-based catalysts: Experimental and theoretical Insights into mechanism and performance.

Thermal catalytic degradation of formaldehyde (HCHO) over manganese-based catalysts is garnering significant attention. In this study, both theoretical simulations and experimental methods were employed to elucidate the primary reaction pathways of HCHO on the MnO2(110) surface. Specifically, the effects of doping MnO2 with elements such as Fe, Ce, Ni, Co, and Cu on the HCHO oxidation properties were evaluated. Advanced characterization techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and X-ray photoelectron spectroscopy (XPS), were employed to discern the physical properties and chemical states of the active components on the catalyst surface. The comprehensive oxidation pathway of HCHO on the MnO2(110) surface includes O2 adsorption and dissociation, HCHO adsorption and dehydrogenation, CO2 desorption, H2O formation and desorption, oxygen vacancy supplementation, and other elementary reactions. The pivotal rate-determining step was identified as the hydrogen migration process, characterized by an energy barrier of 234.19 kJ mol-1. Notably, HCHOO and *CHOO emerged as crucial intermediates during the reaction. Among the doped catalysts, Fe-doped MnO2 outperformed its counterparts doped with Ce, Ni, Co, and Cu. The optimal degradation rate and selectivity were achieved at a molar ratio of Fe: Mn = 0.1. The superior performance of the Fe-doped MnO2 can be ascribed to its large specific surface area, conducive pore structure for HCHO molecular transport, rich surface-adsorbed oxygen species, and a significant presence of oxygen vacancies.

Transforming tree topping waste into flooring: a study on the production and evaluation of oriented strand board finish using urban and garden residues.

Oriented strand board (OSB) has become a popular building material for residential construction, but little research has been conducted on its use as a finish floor material. The study investigated the quality and performance of OSB as an alternative to traditional engineered wood products for finish floors. Four types of OSB finish floors using a mixture of garden and urban tree toppings were produced and evaluated, along with different types and levels of resin and mat moisture content. The finish floor panels were subjected to a battery of tests, including concentrated loading, indentation, falling ball impact resistance, abrasion resistance, and surface wettability. The findings showed that urea formaldehyde resin with garden tree toppings performed best in floor surface indentation, abrasion resistance, and falling ball indentation. The phenol formaldehyde resin with garden tree toppings, on the other hand, showed less moisture absorption and swelling during surface wetting tests and better resistance to force application in the concentrated loading test. Our qualitative comparison revealed that OSB finish floor production using 100% garden tree topping strands and 12% urea formaldehyde resin, along with 14% mat moisture content, produced the best results. The study provides valuable insights into the potential use of OSB as a sustainable and cost-effective finish floor material, using waste materials from urban and garden tree toppings.

Bonding wood with uncondensed lignins as adhesives.

Plywood is widely used in construction, such as for flooring and interior walls, as well as in the manufacture of household items such as furniture and cabinets. Such items are made of wood veneers that are bonded together with adhesives such as urea-formaldehyde and phenol-formaldehyde resins1,2. Researchers in academia and industry have long aimed to synthesize lignin-phenol-formaldehyde resin adhesives using biomass-derived lignin, a phenolic polymer that can be used to substitute the petroleum-derived phenol3-6. However, lignin-phenol-formaldehyde resin adhesives are less attractive to plywood manufacturers than urea-formaldehyde and phenol-formaldehyde resins owing to their appearance and cost. Here we report a simple and practical strategy for preparing lignin-based wood adhesives from lignocellulosic biomass. Our strategy involves separation of uncondensed or slightly condensed lignins from biomass followed by direct application of a suspension of the lignin and water as an adhesive on wood veneers. Plywood products with superior performances could be prepared with such lignin adhesives at a wide range of hot-pressing temperatures, enabling the use of these adhesives as promising alternatives to traditional wood adhesives in different market segments. Mechanistic studies indicate that the adhesion mechanism of such lignin adhesives may involve softening of lignin by water, filling of vessels with softened lignin and crosslinking of lignins in adhesives with those in the cell wall.